The WD series of Gefran, are pressure transmitters for using in High temperature environment. The main characteristic of this series is the capability to read temperature of the media up to 315°C. The constructive principle is based on the hydraulic tra-
smission of the pressure. The fluid-filled system assures the temperature stability.
The phisical measure is transformed in a electrical measure by means the strain-gauge technology.

Digital output signal with DP404 CAN OPEN communication protocol	Transmission frequency (Baud rate): 10 Kbaud to 1 Mbaud (default 500 Kbaud)
Software / Hardware selection of Baud rate and ID nodes	Operation with 1 or 2 settable alarm limits
"Autozero" for temperature compensation	Zero and span drift compensation
80% FSO calibration signal	Pressure ranges: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Hydraulic transmission system to guarantee temperature stability.	Protection level: IP65
Standard threading: 1/2-20 UNF, M18x1.5; other versions on request	Stainless steel 15-5 PH diaphragm with Armoloy coating
For ranges below 100 bar - 1500 psi: stainless steel 17-7 PH corrugated diaphragm with TiN (titanium nitride) coating	Other types of diaphragm on request
Filling with certifyd oil FDA, CFR178.3620 and CFR172.878	Precision: < ± 0.25% FSO (H); < ±0.5% FSO (M)
Extensimetric measurement principle with Wheatstone jumper

 

Gefran MD Series Data Sheet

Gefran MD Series Broschure

Gefran MD Series Installation Manual

Gefran MD Series Instruction and Maintenance Manual

Gefran MD Series Operation Manual